SNR EST207+WB bearing units

H3:90; J:110 mm; Designation of housing:FC207N-; S:17.5 mm; Z:48.8 mm; L:135 mm; A1:9 mm; T min.:-20 °C; Recommended tightening torque for set screw:8 Nm; T max.:100 °C;

G1:M24; H:90 mm; Weight:1.34 kg; A2:40 mm; d1:51.1 mm; T max.:100 °C; L1:76 mm; E:24 mm; L:122 mm; A5:18.8 mm;

Designation of housing:PLE207-; Recommended tightening torque for set screw:5.5 Nm; Designation of bearing:US207G2T20; H1:16 mm; T max.:200 °C; A:44.5 mm; T min.:-20 °C; N1:21.5 mm; L:166 mm; C:25.7 kN;

Load Direction:Radial; Number of Raceway Ring Rows:Single Row; Rolling Element Material:Steel; D:75; Inner/Outer Ring Material:Steel; Outer Ring Shape:Flat; Outer Ring Shape:Flat; Size Standards:Metric System; d:45; Inner/Outer Ring Material:Steel;

Characteristic cage frequency, FTF:0.44 Hz; Da max:22 mm; Dynamic load, C:2.08 kN; Characteristic inner ring frequency, BPFI:7.86 Hz; d:15 mm; Characteristic rolling element frequency, BSF:8.07 Hz; da min:17 mm; Nlim (grease):26,000 rpm; Mass:0.007 kg; Characteristic outer ring frequency, BPF0:6.14

H1:10 mm; A:36 mm; Recommended tightening torque for set screw:3.5 Nm; G:M6x1; Weight:0.44 kg; T max.:200 °C; Designation of open end cover:SCO203-17; H:30.2 mm; T min.:-20 °C; E:9 mm;

Flange Shape:Compact Type; Volume Discount:Available; Bearing I.D. d(mm):15; Seals:DD (Contact Rubber S; Housing Material:1045 Carbon Steel; Shape:Flange Type; Bearing Used:Deep Groove Ball Bea; Days to Ship:7 Days; Flange O.D. H(φ):49; Bearing Retained:No;

Bearing I.D. d(mm):20; Holder Surface Treatment:Black Oxide Coating; Shape:Flange Type; Shape:Flange Type; Seals:VV (Non-Contact Rubb; Flange O.D. H(φ):69; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Type:Bearings with Housin;

Grease Type:SH33M; d:40; Accessory:No Cover; Basic Load Rating, Dynamic Rating(N):34100; Bearing Unit, Type:Pillow Type; Basic Load Rating, Static Rating(N):21300; Bearing Unit, Type:Pillow Type; Machining:No; Surface Treatment:No; Pillow Type, Category:Standard;

Characteristic inner ring frequency, BPFI:4.92 Hz; Da max:65.5 mm; Max operating temperature, Tmax:180 °C; Nlim (grease):10,000 rpm; f0:13.3; Characteristic cage frequency, FTF:0.39 Hz; Static load, C0:15 kN; Radial clearance class:C3; da min:36.5 mm; Brand:NTN;

Retainer Type:Punching; Torque Symbol:No; Low Torque Specification:No; Width(mm):33; d:65; Low Torque Specification:No; Seal, Shield Symbols:No; Load Direction:Radial; Load Direction:Radial; Bearing Style:Open Type;

d:65; Days to Ship:Quote; Unit Body Material:Cast Iron; Rolling Element Material:Steel; Bearing Unit, Type:Square flange shape; Unit, Type:Bearing unit; Bearing Unit, Type:Square flange shape; Bearing Inner Dia. Shape:Tapered hole adapter; Surface Treatment:No; Surface Treatment:No;

Max. Allowed rpm(rpm):25000; Bearing Style:Double Shielded; Load Direction:Radial; Preload Mark:CM; Days to Ship:9 Days or more; Types:16**/6*** series; Number of Raceway Ring Rows:Single Row; Basic Dynamic Load Rating(N):5100; d:10; Size Standards:Metric System;

T min.:-20 °C; C:21 mm; C0:25.5 kN; B1:48.4 mm; SW:5 mm; Recommended tightening torque for set screw:18.7 Nm; T max.:100 °C; B2:20.7 mm; d1:76.2 mm; m:8 mm;

J:171 mm; S:27.7 mm; G:M6x1; Recommended tightening torque for set screw:22 Nm; A:60 mm; Designation of bearing:EX211G2L3; H2:126 mm; C0:29.2 kN; H:63.5 mm; d1:74.5 mm;