Fersa F15057 thrust ball bearings

Limiting speed:22000 r/min; Mass needle roller and cage assembly:0.012 kg; Basic static load rating C0:20.8 kN; Basic dynamic load rating C:12.5 kN; U:17 mm; Reference speed:20000 r/min; Ew:24 mm; Fw:20 mm; Fatigue load limit Pu:2.4 kN;

Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:27600 N; Basic Static Radial Load Rating Co:23600 N; Oil Speed Rating n2:10000 rpm; Fillet Radius rb:0.60 mm; B:32.00 mm; Grease Speed Rating n1:8000 rpm; d:30.000 mm; D:62.0000 mm;

Basic Dynamic Radial Load Rating C:39000 N; B:25.00 mm; Grease Speed Rating n1:6300 rpm; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:7500 rpm; d:45.000 mm; D:100.0000 mm; Basic Static Radial Load Rating Co:13400 N;

Mass bearing:0.09 kg; a:43 mm; Da max.:26 mm; D2:26.3 mm; r3,4 min.:0.6 mm; da min.:11 mm; d:8 mm; d2:17.7 mm; Basic dynamic load rating C:14.6 kN; Static moment stiffness:20 N·m/mrad;

Fatigue load limit Pu:156 kN; Housing washer:GS 89415; da min.:156 mm; Limiting speed:1900 r/min; Roller and cage thrust assembly:K 89415 M; d:75 mm; Mass bearing:5.96 kg; D1:78 mm; Basic static load rating C0:1530 kN; Reference speed:950 r/min;

da max.:53 mm; B:18 mm; Cb min.:4 mm; d1 ≈:61 mm; T:18 mm; Mass bearing:0.3 kg; Calculation factor Y0:0.8; Dimension series:LM 503300; Db min.:71 mm; Limiting speed:8500 r/min;

D:140.0000 mm; Oil Speed Rating n2:4300 rpm; Basic Static Radial Load Rating Co:163000 N; d:65.000 mm; B:58.70 mm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:154000 N; Grease Speed Rating n1:3200 rpm; Sealed Speed Rating n3:3200 rpm; Accessories:No Shield, no Seal,;

d2:50 mm; Static (Coa):87.4 kN; rs (min):1 mm; T:20 mm; r2s (min):0.3 mm; C:15.5 mm; r1s (min):1 mm; Dynamic (Ca):59.6 kN; D:80 mm; Pu:10.660 kN;

Fillet Radius ra:0.30 mm; Basic Static Radial Load Rating Co:930 N; Grease Speed Rating Open/Shielded n1:36000 rpm; D:19.0000 mm; B:5.00 mm; d:10.000 mm; Accessories:One Seal; Oil Speed Rating Open/Shielded n2:43000 rpm; Sealed Speed Rating n3:20000 rpm; Basic Dynamic Radial Load Rating C:1820 N;

K:4.5 mm; B1:67 mm; d1:125 mm; G1:14 mm; Calculation factor Y1:2.9; D1 ≈:180 mm; B:52 mm; ra max.:2 mm; G:M 140x2; d2 ≈:148 mm;

B1:11 mm; Mass angle ring:0.42 kg; B2:19.5 mm; r3,4 min.:2.1 mm; d1 ≈:104.15 mm; d:75 mm;

d1:135 mm; B4:26 mm; Calculation factor Y0:1.8; Basic dynamic load rating C:1129 kN; K:6 mm; Basic static load rating C0:1460 kN; d2 ≈:175 mm; ra max.:2.5 mm; b:11.1 mm; B:96 mm;

Cap bolt, SAE grade:8; P120°:52.5 kN; H2:44.45 mm; Bearing:23024 CCK/W33; Pa:16.7 kN; H:222.25 mm; Max. speed for Taconite seal:725 r/min; Da:180 mm; P150°:48 kN; da:104.775 mm;

d:30.000 mm; Grease or Oil Speed Rating n1:6700 rpm; Basic Static Radial Load Rating Co:4650 N; Basic Dynamic Radial Load Rating:15600 N; D:62.0000 mm; B:48.00 mm; Fillet Radius ra:1.00 mm; Width C:16 mm;

Basic Static Radial Load Rating Co:1200000 N; Fillet Radius ra:3.00 mm; B:126.00 mm; Oil Speed Rating n2:1400 rpm; Basic Dynamic Radial Load Rating C:663000 N; d:280.000 mm; D:460.0000 mm; Grease Speed Rating n1:880 rpm; Fillet Radius rb:1.00 mm;